Water treatment

Description Specification Downloads Description Submersible pump with cast iron pump body, motor casing and adjustment ring impeller. Cast iron adjustment disk coated with abrasion-proof rubber. Stainless steel shaft, handle, filter, bolts and screws. Silicon/carbide mechanical seal, inspectionable oil chamber. Continuous duty submersible induction motor, in a watertight casing. Rotor mounted on oversized greased sealed-for-life ball bearings. Thermal protection in the windings, to be connected to the control panel. 10 mt of neoprene rubber power cable. In order to operate, the pumps must be equipped with a control and protection system, supplied separately and not connected to the electropumps. Features Operating range: from 6 to 33 m3/h with head up to 19,2 mt for the single-phase version and 21,5 mt for the three-phase version. Liquid quality requirements: sandy, muddy or sludgy water from building sites, clean waste water, rain water, ground water, fountain, river or lake water, always non aggressive. Liquid temperature range: from 0°C to +55°C. Free passage through the

Description Specification Downloads Description The submerged aerator is designed for liquid waste aeration in small water treatment systems. Other fields of application include pond water oxygenation and fish farms. Thanks to its specific design, the new NOVAIR system guarantees optimal oxygenation of water treatment plants by means of a large and thick cloud of fine bubbles. The fluid dynamics study has been mainly focused on the impeller’s blade profiles, with a view to avoid damaging microorganisms present in the water when starting operation. As the aerator is installed vertically, its body is supplied with a supporting base. Technically speaking, motor cooling is guaranteed by large contact surfaces between motor casing and the liquid. The power cable is coated with resin against humidity and leaks and cabling has been made easier, in order to favour maintenance operations and cable replacement. The excellent wear resistance of the stainless steel motor shaft, with ceramic bush around the sealing rings, guarantees long product durability.

The Filpumps Emerald system is a compact,economical UV system that is designed with the consumer in mind. The Emerald system utilises commonplace single ended low pressure UV lamp technology, thus making the system not only economical for energy running costs,but also for replacement UV lamps. The single ended UV lamp also makes servicing the equipment very simple.

Description Specification Downloads General Description Price on application. Sediment filters are needed when the water supply is cloudy or turbid. The particles in the water will block plumbing systems, leave unsightly staining, may contain toxic chemicals or bacteria. The easiest way to remove the particles is by passing the water through a media where the particles get stuck and allow clear water to flow through. The particles can be periodically ƒ??backwashedƒ?? away to drain. Our fine sand filter has a more irregular surface than sand giving more efficient removal of suspended matter. This means the equipment can be smaller and higher flow rates can be achieved for a given size. Particles down to 5 to 10 micron are typically removed. The media must be soaked before use. Part Ref Service flow (m3/hr) Backwash flow (m3/hr) Connection size Footprint Price Width (mm) Depth (mm) Height (mm) 1054/WS1/FS 1.5 1.9 1" 269 390 1597 POA 1252/WS1/FS 2.2 2.7 1" 315 390 1597

Description Specification Downloads Price on application General Description Please contact us for a price. CR media is a silica crystal that works by an ion exchange process which removes iron, manganese and hardness (and reduces ammonia). The minimum pH requirement is 6.0 and CR media balances the pH in these acidic waters. CR media works at itƒ??s best on clear water, i.e. when the iron/manganese are in a dissolved form. CR media will also reduce hardness with no extra treatment. The regeneration process is exactly the same as that used in a water softener and requires regeneration with salt (sodium chloride). CR media has a number of advantages over conventional systems in that pH correction, iron/manganese removal, ammonia reduction and softening can all be addressed in a single process. It can reduce dissolved iron and manganese even at pH 6 (most other medias can not). Water flows into the valve at the top, down through the media and then up

Description Specifications Downloads Product characteristics at a glance • Awakens the biology in the FiltoMatic CWS to 100 %, even after just a few days • Detoxification of nitrite, ammonium, and ammonia starts immediately • Well-suited for post-dosing if some of the water is changed or when cleaning the filter! Container size (litres) 2 Suitable for ponds up to max. (litres) 100, 000 Optimal supplements OptiPond, Safe&Care BioKick 2 Litre Operating Instructions