Description Specifications Downloads Description • Binds excess phosphates and reduces algae growth • Binds hydrogen sulphides that can cause bad odours • Simple application directly onto the pond surface • Keeps phosphates in anaerobic zones, such as pond silt PhosLess Direct 500 ml: Container size 500 ml Suitable for ponds up to max. (m3) 10,0 Suitable for ponds with fish stock (m3) 10,0 PhosLess Direct 5 litres: Container size 5 litres Suitable for ponds up to max. (m3) 100,0 Suitable for ponds with fish stock (m3) 100,0 PhosLess Direct Operating Instructions
Description Specifications Downloads Whether the OASE modular filtration system is operated as a gravity-fed filter in the ground or as a pump-fed version. The ProfiClear M1 Classic pump chamber ensures the correct positioning of the filtration pump: • For reducing pressure losses • For safe set-up in swimming ponds in compliance with standards • For simple maintenance and over wintering • For protection against excessive sludge • Two inputs for connecting to the bottom drain and skimmer. • On the floor there is a sediment chamber for debris which leaves the pump chamber via the sludge drain. The ProfiClear M2 Classic coarse debris extractor enables simple and safe extraction of solids to a size of 300 microns. • Incoming water is fed via two large-surface extraction sieves into the next filter chamber. • By pulling the slide valve pollutants leave the system via a DN 50 pollutant discharge. This process is supported by rinsing nozzles. • The extraction sieves are
Description Specifications Downloads Screendrive regularly and automatically cleans the coarse debris extractor in the ProfiClear M2 module. Two motors drive the cleaning brushes and the sieves are freed of debris. An integrated timer starts and controls the cleaning automatically every 30 minutes. Dimensions in mm (L x W x H) 700 x 230 x 120 Voltage 230V / 50Hz , 12V DC Power consumption in Watts 4.5 Cable length (primary) in m 2 Cable length (secondary) in m 5 Guarantee 2 years ProfiClear Screendrive Operating Instructions ProfiClear Screendrive Spare Parts
Description Specification Downloads Neutralising filter for acidic water Naturally occurring acidic ground waters can cause corrosion of pipework, heating cylinders and equipment. The copper is dissolved out of the plumbing and is deposited as blue stains on fittings and fixtures. As heat speeds up chemical reactions, you may see more staining on the hot tap. Any iron and manganese present will result in poor tasting water, in addition to staining baths, basins and any appliances a red or brown colour. The Filpumps System The simplest and safest way to raise the pH is to run the water through a vessel containing a bed of specially prepared limestone. This contains calcium and magnesium minerals, which are the salts found in waters of pH greater than 7.0. The limestone gradually dissolves increasing the pH level of the water. Once this has taken place, the water is less able to dissolve the metal from copper or lead pipes and fittings. As the limestone
Description Specification Downloads Price on application General Description Nitrate levels in many waters are often high. Over 60% of nitrate enters water from agricultural land. High concentrations of nitrate in water can cause methaemoglobinaemia in very young children (blue baby syndrome). The nitrate is converted to nitrite in the body which in turn interferes with oxygen up take in the blood. The current regulatory standard of 50 mg/l nitrate is derived from the standard in the European Union's Drinking Water Directive which is intended to ensure that drinking water will not cause methaemoglobinaemia. The most common method of removing nitrate is with an ion exchange resin. The nitrate rich water passes over a resin where the nitrate is exchanged for chloride ions. When no more nitrate can be exchanged the resin needs to be replaced or regenerated by rinsing with salt. Part Ref Service flow (m3/hr) Resin Vol. (ltr) Connection size Price Type MINSTRAL10/NIT 0.4 10 3/4" POA Minstral Cabinet
Description Specification Downloads Price on application General Description Sediment filters are needed when the water supply is cloudy or turbid. The easiest way to remove the particles is by passing the water through a media where the particles get trapped allowing clear water to flow through. The particles can be periodically backwashed away to drain. Sand is the ideal media for this. Only the highest quality, triple washed 0.4 to 0.8mm size water treatment grade sand is used in these systems typically reducing particles to about 40m. Part Ref Service flow (m3/hr) Backwash flow (m3/hr) Connection size Footprint Price Width (mm) Depth (mm) Height (mm) 1054/WS1/FS 1.5 1.9 1" 269 390 1597 POA 1252/WS1/FS 2.2 2.7 1" 315 390 1597 POA 1354/SW1/FS 2.5 3.1 1" 341 390 1584 POA 1465/WS1/FS 3 3.6 1" 369 390 1870 POA 1665/WS1/FS 3.7 4.8 1" 406 406 1875 POA 1865/WS1/FS 4.8 6 1" 510 510 1997 POA Important Notes Regarding Selection When selecting a
Accreditation
© 1992 - 2025 • Filpumps Ltd • All Rights Reserved • Design & built by REASON Agency Ltd