Pumps

Description Specification Downloads Description The models NovaPond are submersible pumps specially designed for the recirculation of water in garden ponds, to create waterfalls or other water features. They are designed to pump clean water containing solid particles with a maximum diameter of 10mm. Suitable for continuous operation. Designed for horizontal or vertical installation. Environmentally safe. Materials resistant to corrosion and oxidation. Motor with thermal overload protection. Adjustable suction filter to enable transit of solid particles with a diameter from 5 mm to 10 mm. Supplied with power cable and plug, and self-sealing coupling.

Description Specification Downloads Description PULSAR pumps, which are very silent running, can beinstalled inside boreholes and sumps and eliminates allpotential problems of suction and unpriming.Multi-stage close-coupled borehole pump with hydraulicsection below motor, which is cooled by the pumpedliquid. Impellers, diffusers, strainer and oil sump inabrasion-proof thermoplastic. Outer liner, stator sleeve,upper head with delivery connection and closing ring inAISI 304 stainless steel. Rotor shaft extension in AISI 304.Elastomers in NBR. Stainless steel screws.Double mechanical seal with interposed oil chamber,made of ceramic/carbon on motor side and siliconcarbide/silicon carbide on pump side.Submersible with continuous duty asynchronous motor.Rotor running on ball bearings, oversized to ensure lownoise and durability Built-in thermal and current overloadprotection and a capacitor permanently on in the singlephaseversion. To protect the three-phase motor useremote overload cut-outs in compliance with statutoryregulations.Constructed in compliance with CEI 2-3 and CEI 61-69(EN 60335-2-41) standards. Features Operating range: from 0.9 to 7.2 m3/h with head up to 86 metres. Maximum permissible sand quantity: 50 g/m3. Motor

Description Specification Downloads Description PULSAR pumps, which are very silent running, can beinstalled inside boreholes and sumps and eliminates allpotential problems of suction and unpriming.Multi-stage close-coupled borehole pump with hydraulicsection below motor, which is cooled by the pumpedliquid. Impellers, diffusers, strainer and oil sump inabrasion-proof thermoplastic. Outer liner, stator sleeve,upper head with delivery connection and closing ring inAISI 304 stainless steel. Rotor shaft extension in AISI 304.Elastomers in NBR. Stainless steel screws.Double mechanical seal with interposed oil chamber,made of ceramic/carbon on motor side and siliconcarbide/silicon carbide on pump side.Submersible with continuous duty asynchronous motor.Rotor running on ball bearings, oversized to ensure lownoise and durability Built-in thermal and current overloadprotection and a capacitor permanently on in the singlephaseversion. To protect the three-phase motor useremote overload cut-outs in compliance with statutoryregulations.Constructed in compliance with CEI 2-3 and CEI 61-69(EN 60335-2-41) standards. Features Operating range: from 0.9 to 7.2 m3/h with head up to 86 metres. Maximum permissible sand quantity: 50 g/m3. Motor

Description Specification Downloads Description PULSAR pumps, which are very silent running, can be installed inside boreholes and sumps and eliminates all potential problems of suction and unpriming. Multi-stage close-coupled borehole pump with hydraulic section below motor, which is cooled by the pumped liquid. Impellers, diffusers, strainer and oil sump in abrasion-proof thermoplastic. Outer liner, stator sleeve, upper head with delivery connection and closing ring in AISI 304 stainless steel. Rotor shaft extension in AISI 304. Elastomers in NBR. Stainless steel screws. Double mechanical seal with interposed oil chamber, made of ceramic/carbon on motor side and silicon carbide/silicon carbide on pump side. Submersible with continuous duty asynchronous motor. Rotor running on ball bearings, oversized to ensure low noise and durability Built-in thermal and current overload protection and a capacitor permanently on in the singlephase version. To protect the three-phase motor use remote overload cut-outs in compliance with statutory regulations. Constructed in compliance with CEI 2-3 and CEI 61-69 (EN 60335-2-41) standards.

Description Specification Downloads Description The PULSAR DRY pumps are used in lifting and pressurisation systems for water from primary collection tanks or wells and are suitable for providing pressurized water in domestic systems, small-scale farming and sprinkler systems for gardens and vegetable gardens. The pump is extremely silent and this feature makes it suitable for use with pressurisation systems in unventilated rooms or in areas prone to flooding. Single-piece multi-stage bore-hole pump or of surface with hydraulic assembly positioned under the motor which is cooled by the pumped liquid. Impellers, diffusers, filter and oil sump in abrasionproof thermoplastic. Pump liner, stator sleeve, upper head with sleeve and sealing ring in AISI 304 steel. Upper and lower bearing supports in dezincification-proof pressed brass. Rotor shaft extension in AISI 304. Elastomers in NBR. Stainless steel hardware. Double mechanical seal separated by an oil chamber, in ceramic/carbon on the motor side and carburundum/carburundum on the pump side. The sealing system ensures the motor

Description Specification Downloads Description The DAB S4 are a 4 inch multi-impeller borehole pumps for clean water, designed for water boosting, gardening and irrigation, lifting water from boreholes in domestic and residential, civil and commercial applications and irrigation systems also for agriculture. The S4 pumps must be installed in wells with a diameter of at least 4", or in tanks or cisterns and it increases the pressure of water that can then be used for example to water medium or large gardens or (in the case of models with a greater flow and head) in irrigation systems in agriculture. These are sand-resistant pumps with a high performance. The entire range complies with the standard MEI ≥ 0.4. All the model have the ACS certificate. WRAS and DM174 certificate are pending approval. Features Pumped liquid: clean, free from solid or abrasive substances, chemically neutral and close to the characteristics of water. Liquid temp. range: from 0?C to +40?C. Motor protection level: