Pumps

Description Specification Downloads Description Centrifugal type. Directly coupled pump and motor with rigid coupling. Impellers and thrust rings in Noryl and diffusers in self-lubricating polyacetyl. Pump liner, shaft and coupling, strainer and cable sheath in stainless steel. Base support and head in brass with check valve incorporated in head. Submersible asynchronous twopole motor made entirely of AISI 304 stainless steel with brass bearings. Squirrel cage rotor in copper mounted on Kingsbury thrust block. Cooling of the thrust bearing assembly and the bushings is provided by water, thereby eliminating the risk of oil contamination. Canned-type stator in an airtight casing made of AISI 304L stainless steel. The automatic reset thermal protection device is integral with the motor.   Features Clean, free of solid or abrasive contaminants, non-viscous, chemically neutral, close to the properties of water. da 0° C a +35° C. 40 g/m3. IP 68. F. 20/h. MICRA 50 - 1 m. MICRA 75 - 1,2 m. MICRA 100 - 1,4

Description Fountain and pond pumps. Use of ceramic parts in order to reduce wear and tear. Filtering with a double grid, without sponge, to keep maintenance low. Thermally protected, any possible damage to the motor is avoided thanks to the thermo protector. Impeller designed to expel dirt and solid particles.

Description Specification Downloads Description Vertical multistage centrifugal pump suitable in medium and large water supplies. It is ideal for pressure sets, boiler feed and hot water circulation, conveying condensate and cooling water, fire fighting and washing systems, supplying drinking water and feeding pressurised tanks, sprinkler and spraying irrigation systems. All the parts in contact with liquid are stainless. AISI 304 stainless steel internal pump body and AISI 304 stainless steel ULTEM, impellers, pump shaft and base liner. Cast iron external pump body treated with ataphoresis, cast iron support. “Cartridge” silicon/silicon mechanical seal exempt from maintenance. Connected to the motor with a rigid coupling. Features Motor protection: IP 55. Insulation class: F. Standard voltage: three-phases 230-400 V / 50 Hz up to 4 kW included. three-phases 400 V ? / 50 Hz on the top of 4 kW. Operating range: from 4 to 29 m3/h with head up to 249 meters. Pumped liquid: without solid or abrasive substances, not viscous, not

Description Specification Downloads Description The Nova Salt W M-A is a multi- purpose submersible pump specifically constructed for use in salt water. Anti-corrosive and rust-proof materials. Motor casing, shaft, screws and nuts made of stainless steel AISI 316. Cable with tin plated conductors. Motor with thermic overload protection. Wear resistant shaft and impeller. Excellent cooling of the motor that enables the pump to operate even when it is partially submersible. Manual and Automatic version with start/ stop float switch. Supplied with power cable with plug and self-sealing fitting.

Description Pump body, impeller, cap and suction grid in technopolymer.Motor, rotor shaft and screws in stainless steel.Triple O-ring seal interposed with an oil precombustionchamber. Continuous duty submersible asynchronousmotor. Stator fitted in an airtight stainless steel casing.Rotor mounted on overdimensioned, greased-for-life ballbearings. Built-in thermal and current overload protectionand a capacitor permanently on in the single-phaseversion. For the protection of the three-phase motor it isadvisable to use a suitable overload protection complyingwith the regulations in force. Supplied with standardpower cables for the single-phase version:5 metres H05RN-F for: NOVA 180 M-ANOVA 300 M-ANOVA 600 M-A10 metres H05RN-F for: NOVA 180 M-NANOVA 200 M-NA10 metres H07RN-F for: NOVA 600 M-NAStandard cables supplied for the three-phase version:5 metres of HO7RN-F cable. For the single phase thestandard is a SCHUKO plug EEC VII.For special version available with special stainlesssteel motor shaft. Specification Features Operating range: from 1 to 16 m3/h with head up to 10.2 metres. Liquid temperature range: from 0°C to +35° C for domestic

Description Specification Downloads Description Pump body, impeller, cap and suction grid in technopolymer. Motor, rotor shaft and screws in stainless steel. Triple O-ring seal interposed with an oil precombustion chamber. Continuous duty submersible asynchronous motor. Stator fitted in an airtight stainless steel casing. Rotor mounted on overdimensioned, greased-for-life ball bearings. Built-in thermal and current overload protection and a capacitor permanently on in the single-phase version. For the protection of the three-phase motor it is advisable to use a suitable overload protection complying with the regulations in force. Supplied with standard power cables for the single-phase version: 5 metres H05RN-F for: NOVA 180 M-A NOVA 300 M-A NOVA 600 M-A 10 metres H05RN-F for: NOVA 180 M-NA NOVA 200 M-NA 10 metres H07RN-F for: NOVA 600 M-NA Standard cables supplied for the three-phase version: 5 metres of HO7RN-F cable. For the single phase the standard is a SCHUKO plug EEC VII. For special version available with special stainless steel motor shaft.