Drainage, Sewage & Wastewater Pumps

Description Specification Downloads Description Submersible electric pumps particularly suitable for the removal of drainage water in construction sites, open mines or quarries. Thanks to their rugged construction and reliability, these pumps can be used with harsh and abrasive liquids containing solids with maximum dimensions of up to 6 mm. Open impeller in CRA2 650 HB high-chromium cast iron, outer sleeve in AISI 304 stainless steel, double mechanical seal in silicon carbide/silicon carbide on pump side and carbon/alumina on motor side. Suction screen in AISI 304 stainless steel. Dry-type asynchronous sealed motor, cooled by the pumped liquid. Rotor mounted on oversized greased sealed-for-life double ball bearings to ensure silent running and long life. Integral capacitor in singlephase versions. Thermal and overcurrent protection are the responsibility of the user.Constructed in compliance with CEI 2-3CEI 61-69 (EN 60335-2-41). Features Motor protection level: IP 68. Insulation class: F. Continuous duty, with completely immersed pump. Facility for operation also with partially immersed pump. The single-phase

Description Specification Downloads Description Submersible electric pumps particularly suitable for the removal of drainage water in construction sites, open mines or quarries. Thanks to their rugged construction and reliability, these pumps can be used with harsh and abrasive liquids containing solids with maximum dimensions of up to 10 mm. Open impeller in CRA2 650 HB high-chromium cast iron, outer sleeve in AISI 304 stainless steel, double mechanical seal in silicon carbide/silicon carbide on pump side and carbon/ alumina on motor side. Suction screen in AISI 304 stainless steel. Pump body in EN GJL 200 cast iron clad internally with abrasion and wear resistant Nitrile rubber (NR). Dry-type asynchronous sealed motor, cooled by the pumped liquid. Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life. Overcurrent protection is set in the motor windings as standard. Constructed in compliance with CEI 2-3CEI 61-69 (EN 60335-2-41) standards. Features Motor protection level: IP 68. Insulation class: F. Continuous

Description Specification Downloads Description Submersible pump with cast iron pump body, motor casing and adjustment ring impeller. Cast iron adjustment disk coated with abrasion-proof rubber. Stainless steel shaft, handle, filter, bolts and screws. Silicon/carbide mechanical seal, inspectionable oil chamber. Continuous duty submersible induction motor, in a watertight casing. Rotor mounted on oversized greased sealed-for-life ball bearings. Thermal protection in the windings, to be connected to the control panel. 10 mt of neoprene rubber power cable. In order to operate, the pumps must be equipped with a control and protection system, supplied separately and not connected to the electropumps. Features Operating range: from 6 to 33 m3/h with head up to 19,2 mt for the single-phase version and 21,5 mt for the three-phase version. Liquid quality requirements: sandy, muddy or sludgy water from building sites, clean waste water, rain water, ground water, fountain, river or lake water, always non aggressive. Liquid temperature range: from 0°C to +55°C. Free passage through the

Description Specification Downloads Description  SUBMERSIBLE PUMPS • Ideal for filling/draining stations. • designed for Single-phase and three-phase pumps. • Working with float switches (max.5). • Working with level probes (max.5). • Working with depths sensors(0-10V / 4...20mA). • Amperometric protection. • Exchange of the pumps starting order (each start). PRESSURE PUMPS • Ideal to drive 2 pumps booster sets. • designed for Single-phase and three-phase pumps. • Working with pressure switches (max. 4). • Working with depths sensors (0-10V / 4...20mA). • Amperometric protection. • Exchange of the pumps starting order (each start).  

Description Specification Downloads Description Cast iron submersible pumps with the vortex impeller for sewage, suitable for foul waste water with solid contents with the 62 mm as maximum diameter. Technopolymer upper cover with the handle. Nylon vortex impeller with the fiber glass abrasion proof resistance. Motor body, hydraulic section and any impeller in cast iron EN GJL 200. Single mechanical seals pump side in silicon carbide/silicon carbide and radial seal in oil chamber. On request : oil chamber with water level detector kit.. Dry type asynchronous sealed motor. Rotor mounted on ball bearings to ensure silent running and long life. For single phase version, capacitor and ove-rcurrent protection are set in external control box supplied with Schuko plug. For three phase versions, thermal and over-current protection are responsibility of the user. Features Motor protection rating: IP 68 Insulation class: F Continuous duty with completely immersed pump. The single-phase version can be equipped with float switch for automatic starting and stopping

Description Specification Downloads Description Cast iron submersible pumps with the vortex impeller for sewage, suitable for foul waste water with solid contents with the 80 mm as maximum diameter. Technopolymer upper cover with the handle. Nylon vortex impeller with the fiber glass abrasion proof resistance. Motor body, hydraulic section and any impeller in cast iron EN GJL 200. Double mechanical seals in oil chamber: motor side carbon/alumina, pump side in silicon carbide/silicon carbide. On request: oil chamber with water level detector kit. Dry type asynchronous sealed motor. Rotor mounted on ball bearings to ensure silent running and long life. Thermal and over-current protection are responsibility of the user; on request available already installed in the motor windings. Features Motor protection rating: IP 68. Insulation class: . F Continuous duty with completely immersed pump. The single-phase version can be equipped with float switch for automatic starting and stopping of the pump. Supplied as standard with 10 mt H07RN-F power cable. Operating