Description
-
Description
Pump body, impeller, cap and suction grid in technopolymer.
Motor, rotor shaft and screws in stainless steel.
Triple O-ring seal interposed with an oil precombustion
chamber. Continuous duty submersible asynchronous
motor. Stator fitted in an airtight stainless steel casing.
Rotor mounted on over-dimensioned, greased-for-life ball
bearings. Built-in thermal and current overload protection
and a capacitor permanently on in the single-phase
version. For the protection of the three-phase motor it is
advisable to use a suitable overload protection complying
with the regulations in force. -
Features
Supplied with standard
power cables for the single-phase version:
5 metres HO5RN-F cable for: FEKA 600 M-A.
10 metres HO7RN-F cable for: FEKA 600 M-NA.
Standard cables supplied for the three-phase version:
5 metres of HO7RN-F cable. For the single phase the
standard is a SCHUKO plug EEC VII.
For special version available with special stainless
steel motor shaft.
Operating range: from 1 to 16 m3/h with head up to
10.2 metres.
Liquid temperature range: from 0°C to +35° C for
domestic use.
Pumped liquid characteristics:
FEKA sewage water from septic tanks.
Granulometric passage through the suction grid:
FEKA 600 25 mm.
Min. suction depth:
FEKA 600 A 175 mm.
FEKA 600 NA 38 mm.
Maximum immersion depth: 7 metres.
Maximum dry running time: 1 minute.
Protection level: IP 68.
Insulation class: F.
